Post by Ron Kulas on Oct 18, 2008 20:43:16 GMT -6
A friend from Maine (a Maliseet Indian) sent me a small moose antler and asked that I make a knife for a friend of ours, using the antler.
I cut the handle from a section of the antler that provided a finger guard.
Then picked a blade form that matched the handle.
Then made an O1 steel blade with a little file work.
Then contoured the brass and added a some ink.
Next I made a sheath with a moose antler image.
I used the tip of the antler as a display base.
These are the pics I got from our friend. He got several diff bucks in diff states.
It's a good feeling to make a useful tool that can be enjoyed by another.
I cut the handle from a section of the antler that provided a finger guard.
Then picked a blade form that matched the handle.
Then made an O1 steel blade with a little file work.
Then contoured the brass and added a some ink.
Next I made a sheath with a moose antler image.
I used the tip of the antler as a display base.
These are the pics I got from our friend. He got several diff bucks in diff states.
It's a good feeling to make a useful tool that can be enjoyed by another.